VAM Top/New VAM Casing and Tubing Equivalent
SY/T 6194 Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells
API 5CT Casing and Tubing
BS EN ISO 11960 Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells
NF M87-207 Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells
JIS G3439 Seamless Steel Oil Well Casing, Tubing and Drill Pipe
IS 4270 Steel tubes for well spainend casing pipes
Steel Grade H40, J55, K55, N80, M65, L80, L8013CR, C90, C95, T95, P110, Q125, V150
Process: ERW and Seamless
Outer Diameter: 1.05 - 30 inch
Wall Thickness: 0.1 - 1 inch
Length: R1(4.88mtr-7.62mtr), R2(7.62mtr-10.36mtr), R3(10.36mtr or longer)
Casing: LTC, STC, BTC
Tubing: NUE, EUE
Premium connection: New VAM, VAM Top, Hydril CS, PH6, etc (equivalent).
End: Beveled, Square cut. And pipe protection cap specially for casing and tubing.
Surface: Corrosion proofing water based paint
Heat treatment: Normalized, Quencher & Temper
Coating: A choice of black or clear varnish exists for coating of the OCTG material. This coating is a solvent deposited non toxic phenolic PVB that provides atmospheric resistance to oxidation for a period of 6 to 12 months.
Marking: Identification marking is applied to every pipe by means of paint stencilling along the length of the pipe and is in full accordance with Appendix D of API 5CT. Colour band marking is applied in accordance with said specification. Additional information pertaining to the bundle is printed on a weatherproof plastic label that is attached to the bundle.
Test: Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield strength, Elongation), Technical Properties (Flattening Test, Flaring Test, Bending Test, Hardness Test, Blow Test, Impact Test etc), Exterior Size Inspection, Nondestructive Test (Ultrasonic flaw detector, Eddy current flaw detector), Hydrostatic Test(The standard pressure is limited to 20,7 MPa (3000psi)), Electro-magnetic inspection to SR1 is carried out on all line pipes.
Mill Test Certificate: EN 10204/3.1B
IF YOU ARE INTERESTED IN OUR PRODUCT, PLEASE CONTACT WITH ME FEEL FREE . THAT'S OUR PLEASURE SURVISE FOR YOU.